B&P Lamp Decor
E12, 75W-125V High heat, Keyless porcelain candelabra socket, paper shell insulator, screw terminals, 1/8F base, 4" heigheight U.L listed
Cup Shaped Design, Base Only Finial, Antique Brass Finish, 5/8 inch height, tap 1/4-27F Fits a regular harps threaded top.
Med. Base (E-26) Modern Style Screw-Together Keyless On/Off Lamp Socket in Antique Brass finish. Unique styling and die cast aluminum shell and cap (with set screw) make these sockets sturdy, economical, and dependable! ...
Med. Base (E-26) Modern Style Screw-Together On/Off Turn Knob Lamp Socket in Brass finish. Unique styling and die cast aluminum shell and cap (with set screw) make these sockets sturdy, economical, and dependable! 60 wat...
Short Keyless, medium base lamp socket with antique brass finish aluminum cap and shell. E-26, 1/8 IPS Cap, 660W-250V, with set screw, No UNO Thread
Clear glass with white painted interior.3 11/64 inch screw fitterDome Utility Type Shade.6 inch diameter
Clear glass sprayed white outside with clear side and bottom panels.Disk shaped porch and utility room glass shade.6 1/2 inch diameter3 1/4 inch height5 7/8 inch fitter
For use with 2.25 Inch fitter neckless pendant glass shades (glass hole I.D. 1v5/8 Inch)1.60 Inch tall x 2.40 Inch O.D.Nickel Stamped steel neckless pendant glass shade holder socket coverSlips 1/8IP
Brass finish washer to clip on adapter - Shade adapter converts washer type shade to fit on regular shape bulbs, brass finish, 1/4-27M threads to fit any standard finial
Porcelain Socket for mini can halogen lamp with 6" leadsPorcelain Socket for Mini Can Halogen LampUL and CSA,250V-1000W, UL and CSA,
3 1/4" FitterCast Brass Shade Holders with 1/8F tapped center hole and 3 set screws, Your Choice: 3 1/4" or 4" FUnfinished Brass, Cast Brass Shade Holders with 1/8F tappeCast Brass Shade Holder
Mid-Century Modern Neckless Ball Shade Holder Kits. Include white enamel neckless ball holder, standard size porcelain socket, 8 foot white 18/3 SVT lamp cord, white enamel canopy and mounting hardware.Neckless Ball Shad...
Clear Glass Deep Cone Pendant Shade (shade only - second photo is for example of use)Hand-blown industrial style shade with 2 1/4 inch lip fitter.Looks great with B&P Lamp pendant fixture and Edison style bulbThis shade ...
Main products of our company :electric, home,toy,clother ,etc. Since its foundation ,the company keeps living up to the belief of :"honest selling ,best quality ,people-orientation and benefits to customers. "We are doin...
E26, 660W-250V, Glazed porcelain Keyless medium base (E26) socket, high heat resistant, bottom insulator, metal 3/8IP cap for lamp pipe, 660W-250V, Leviton Brand
Antique Bronze finish, high quality, U.L. listed lamp holders are specially designed for use in the manufacture and restoration of fine table and floor lamp lighting. Each style comes with a threaded cap and shell for su...
Steel, Brass Plated, 2 1/4" Fitter Size, Clamp-onBrass Plated, 2 1/4" Fitter Size, Clamp-on Type Shade Holder has2 1/4" FitterClamp-on Type Shade Holder
3 1/2" X 6 1/2" Grapes Design Hurricane Shade, 1 5/8 fitter, Grapes Design Clear Hurricane Shade, Clear, hand cut "Grape" design Hurricane shade, 1 5/8 inch fitter
Nickel Plated Brass Modern style spun brass base,1/8F (7/16 inch dia) center hole and wire way hole (7/16 inch dia), 5 1/2 inch top x 6 7/8 bottom (bottom with rolled in edge) x 1 1/8 inch height, nickel plated finish
4 inch height8 3/8 inch diameter7 7/8 inch fitterDisk shaped porch and utility room glass shade.Clear glass sprayed white outside with clear side and bottom panels
Solid Brass Screw-on, Uno-type Shade Holder w/solid brass rosette set screws. 3 1/4" fitter, antique brass finish
1.2 Inch tall x 1.94 Inch O.D.Stamped steel nickel plated neckless pendant glass shade holder socket coverSlips 1/8IPFor use with 2.25 Inch fitter neckless pendant glass shades (glass hole I.D. 1 5/8 Inch)
4 1/2" Clear Retro Utility-Type Glass Shade - 4 1/2 inch height, Clear Retro Utility-Type Glass Shade, 3 1/4 inch threaded fitter, 3 3/4 inch diameter. Round ribs on top and bottom.
2 1/4" Screw On Brass Holder, Antique Bronze Finish, 3 Holes Tap 6/32, 3 Set Screws, 6/32 Thread X 10Mm Long Thread Length.
Pull Chain (On-Off) medium base lamp socket with antique brass finish aluminum cap and shell. E-26, 1/8 IPS Cap, 250W-250V, with set screw, No UNO Thread
7 1/2 clear petticoat shade, 7 1/2 inch diameter clear pressed glass petticoat shade, 2 1/16 inch inside diameter, Fits over chimney to bulge,
Antique Brass Modern style spun brass base,1/8F (7/16 inch dia) center hole and wire way hole (7/16 inch dia), 6 inch diameter, bottom with rolled in edge, 1 inch height, antique brass finish
3 1/4" FitterFixture Shade HolderNickel Plated (brass) Fixture Shade Holder to fit 3 1/4" Fitter Glass Shades, 2 1/2" deep w/rolledUnfinished Brass, Nickel Plated (brass) Fixture Shade H
Brass finish washer to clip on adapter - Shade adapter converts washer type shade to fit on torpedo shape bulbs, brass finish, 1/4-27M threads to fit any standard finial
Vintage Table Lamp Rewiring Kit with Full range Nickel Plated dimmer socket, 8 ft., 18/2 SPT-1 silver cord set, Full range dimmer socket, nuts, washer, assembly instructions. Supplied w/U.L. listed components
Antique Brass finish high quality, pull chain U.L. listed lamp holders are specially designed for use in the manufacture and restoration of fine table and floor lamp lighting. Each style comes with a threaded cap and she...
this socket has a removable turn knob and comes with a 1/4F base, 250V 750W UL listed, ImportedCommonly used on many reflector type floor lamps, this socket has a removable turn knob and comes wHeavy duty 3-Way Mogul siz...
3-Way medium base lamp socket (for 3-way bulbs) with nickel finish aluminum cap and shell. E-26, 1/8 IPS Cap, 250W-250V, with set screw, No UNO Thread
10" Fitter, Tripod Shade Holder for No. 2 Queen Burners **10622, **10622A, **10624A, Protective Coated Brass Plate
Blind Pendant Stem w/Loop, 3/4" Outside Diameter Tube, Unfinished, Blind Pendant Stem, 6" long, 3/4" Outside Diameter tube with 1" diameter loop, To be used with 3/4" slip ring canopy, 1/4M with side out wire way, Not de...
6"Diameter Round White Marble Base 7/16" Center Hole, 3/4" Thick Polished Smooth, Countersunk Bottom Hole .40" Deep X 1.5" Diameter, With 5/16" Diameter Wire Way. Edges Not Rounded-Crisp 90 Degree Angles *
Clear Glass Chimney for certain Gone With The Wind and parlor lamps3 5/16 inch bulge2 3/8 inch fitter12 1/4 inch heightFits Success Burner
Steel Fixture Shade Holder for 4 inch fitter shades. 2 1/2 inch deep with rolled edges and 3 screw eyelets. Slips 1/8 IP. Raw steel, perfect for painting.
4" Fitter4" Fitter, Solid Brass Screw-On UNO Type Shade Holder to fit standard siUnfinished Brass, 4" Fitter, Solid Brass Screw-On UNO Type ShScrew-On UNO Type Shade Holder
Quick Connect Lamp Plugs For 18/2 Lamp Cord6A-125V with Polarized BladesYour choice for SPT-1 or SPT-2 lamp cord and colorU.L Listed
10" Brass Plated under burner tripod with shade ring mounted, fits Models 7-23 (1080BR). Also see #10739 for solid brass holder.
Solid Brass Screw-on, Uno-type Shade Holder w/solid brass rosette set screws. 4" fitter, antique brass finish
7 1/4" Opal Glass Petticoat Shade2 1/16 inch Inside Diameter, 2 7/16 inch heigheight Fits over chimney,7 1/4 inch across, 2 1/16 inch Inside Diameter, 2 7/16 inch heigheight Fits over chimney,Opal pressed glass petticoat...
Raw Steel Fixture Shade Holder for 6 inch shades, 3 3/8 inch deep with rolled edges and 3 set screws. Center hole slips 1/8 IP. No coating, ready for paint.
2 1/4 inch fitter6" IES Opal Glass Reflector ShadeI,E,S, white opal glass reflector shade, Waffle Pattern with 4 3/4 inch6 inch diameter,, I,E,S, white opal glass reflector shade, Waffle Patte